Model Number: SCO-IR-16-9
Brand Name: Xinzhou
Key Specifications/Special Features:
Infrared drying technologyPrinciple: also named as infrared lightIn the electromagnetic spectrum, the electromagnetic radiation is between the red light and microwave
Wave length is longer than infrared light which has a high heat efficiency
This technology is used for the infrared drying machine
Infrared can be assimilated easily by objects and for its radiation and penetration
Infrared makes the objects being dried by deep the interior of the objects and transferring them as energy which remove the bound water and avoid energy wastage
Infrared has good performance on controlling and high speed on heating and drying
Wave length is about 0.75-1000m, named as the wave length is except on the red light wave (0.6-0.75m)
Infrared is the main heat rays for the regular range below 2000C
People used to divide it as closed infrared, intermediate infrared, far infrared which means the distance between the electromagnetic spectrum and the red light
Features:
- Penetrating power, heating at the same time for inside and outside
- For ordinary heating method, the heat was transferred to another end or transferring from the object’s surface to the inside, that cannot makes the objects to be heat balanced and heating speed and working efficiency is too slow
- Infrared heats objects on both inside and outside at the same time to insure the balance heating for objects, so that can meet the request on both drying speed and the quality
- Heat from inside so there no surface conjunctiva which will improve the efficiency for 2-3 times and same the energy for 2-3 times
- Short producing progress
Due to the high efficiency of the drying process, (normally need to take several hours but it only take 10 minutes or less than 1 hour), so it can save the working space and progress Heating time was shorten to save more energy and simplify the process
- Synchronous control to reduce the damage rage, users can control the heating equipment and production line at the same time to reduce any deformation or blistering
- Heating equipment will transfer the heat radiation within 1-2 seconds and will stop heating when production line was closed
- Controlling separately, to improve the application for painting material
- Common painting material is solvent, water-based and powder
- Equipment was divided into 3 parts which can be set according to temperature
- For example, the staving varnish can only be dried when achieve certain temperature and time
- Clean heating process
| Model |
Heating method |
Feed stock (mm) |
Heating (mm) |
Discharging |
Feed stock height (mm) |
Temperature range |
Temperature uniformity |
Power |
|
| SCO-IR-16-9 |
IR+ hot air |
2950 |
24000 |
2500 |
100 |
Normal-400 degree |
±2% |
380V |
|
By certification [File Integrity]
