Model Number: KL210-4K-06-1
Brand Name: KELVIN / OEM
Key Specifications/Special Features:
Step 1:Code clear to clear factory preset codes used for testing purpose, you need to do the followingPress and hold the top two buttons (A and C label) at the same time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous slow blinking, indicating that the remote control codes stored is deletedStep 2:
Code clone place the original remote control and copy remote close together (<10mm)
Press and hold one button on your original remote and the button on copy remote which you wish to be programmed on at the same time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, indicating that the button is successfully copied
Repeat the above clone step for other buttons you wish to copy
Code recovery:
- Use only when you mistakenly removed the code copied
- Press and hold the right two buttons (A and B label) at the same time for approximately 3 seconds, then LED indicator flashes three times and stops blinking, indicating that the original remote control codes have been restored
- Alternate way to code recovery step is clear the codes and relearn them again